Відео

Thank you sir for giving me the “umph” that I needed. I had several ideas swimming around in my head of how I wanted to paint mine and you have definitely enlightened me. Thank you again from Arkansas, U.S.A.

Great idea. Thanks for sharing. Greetings from Bulgaria.

Great idea. Thanks for sharing. Greetings from Bulgaria.

Definitely would like to see modeling compound great video

Great video

If you put your moulds with your fresh wet plaster in them on thin ply wood or thick carboard and slightly over hang the ply on the edge of a table, You can the repeatedly tap the ply wood in a constant rhythm for a minute to so. The vibration will release the bubbles, This works for me.

this is how I am, I have so many ideas of what I want to try and do but I get in my head what if I screw it up, what if it doesn't come out the way I want it to look like.. so I end up not even starting the project.

see I use the camo spray can, then I use a micro brush to paint the rails a rust color, but I have just started to test using powders on them.

WHAT accent is that.... is so difficult to listen to.

Hi. I am starting the model railway hobby and currently building my layout. Your videos are fantastic for me as trying to get even the basics sent out here to Thailand costs an absolute fortune and that is when you can get a vendor to ship out here so your DIY tips are top notch. Thanks

This is super helpful, especially for beginners who just want to experiment and play around. (Like me!)

This fantastic tutorial has inspired me greatly! Thank you! I have subscribed, too. I like your teaching style; you showed the steps in the right amount of detail for my needs. 👍🏼

Hi ! Can this be printed on a4 size?

Baie dankie ..gaan probeer ...

Moin Bin über dein Maschendrahtzaun Video auf deinen Kanal aufmerksam geworden und fand die Idee super, hab dann auch gleich mal Maschendraht-Bau-Material Bestellt ;) Bei den Bäumen bin jedoch auch interessiert, da ich für den Tabletop Plattenbau auch einige Bäume für den Maßstab 1/285 oder auch 6mm bräuchte. Denkst du, deine Bäume wären da zu gross? Hab mal ein paar bei Amazon bestellt gehabt, die so ähnlich aussehen wie deine für 12.-€ für glaube 30 Bäume und die kamen mir vom Maßstab her gar nicht so schlecht vor, aber wenn ich da noch ein paar günstigere bekommen kann, bestelle ich auch gerne aus Fern-Ost.

[thank, you for youre great helpful video.]

Good job, I like both your honesty and results

Very well done videos! Interesting, helpful and inspirational!

Cool results. Here in the Southeast U.S., I'd go with a Kelly green, deep red, or mid-gray tone for the roof. I've found that either using a gray resin (I like Elegoo's ABS-Like 3.0), or using a gray primer coat on other colored resins, makes for the best pre-painting color. You could save time by tilting the walls so that they are 37 degrees from horizontal with the interior side facing the print plate and updating supports.

Nice job.

Marvelous! Make more videos! You are very interesting to watch!

I ran out of Sculptamold and had to find a substitute in a hurry. Thanks for this excellent video, Gerben!

Hello I like your Chanel. I like your work. Amazing. I have subscribe your Chanel.. I like landscape modelling. Sorry my Englisch I am from Switzerland.. Alex 🤗🤗👍👍🇨🇭

Nice gerben

Thank you, it’s quite informative.

Good tip mate.

That roadway design process is a master class. Great result and magnificent ground work.

Beautiful finish. Don't forget the Pigeons or Seagulls and their signatures :)

Hello from Huntsville, AL USA. I've been using my FDM and resin printers mainly for functional prototyping of mechanical parts for years. However, my work is changing and I now have loads of time available on my printers. I've just started learning the more artistic aspects of modeling and have started experimentation with prints for my HO hobby. Your station design is gorgeous. My printers are the LD-002H from Creality, the Photon Mono X 6Ks from Anycubix, and the Sv06, SV06 Plus, and SV07 Pus from Sovol.

Pt2? I want to see the rest of the transformation please 🙏

Chris sullivan OTAGO NEW ZEALAND RAIL WAY

what about Cellulose/paper insulation and Fine Casting Plaster? Wouldn't need the blender, the plaster comes in various sizes, 25kg bag being the best value, £24, and a huge bag of Thermofluff is about £18

they are black because it makes weathering them easier ,,i always paint things black when im gonna weather them ,,I once wondered why black but ive known for years now ,,good video

Great craftsmanship. Very precice.

Nice work as always ✨✨

Those are some amazing mountains you've made, I got the subscription on Model Railroad Academy!

Congrats on the first sponsorship!

Nice work!

could you mix like the egg cartons with newspaper and blend them together

🤣😂

Hi, do you have a video on how to make the foam cutter?

After seeing this vid & tucking it away in my head "for future reference", I'm finally at the point where it's time to start scenery. Confirming what I remembered, just watched it again; and, I've been saving egg cartons! Thank you for your dedication in testing! Appreciate your efforts on our behalf! 🤜🏻🤛🏻🙌🏻

I kind of wish maybe you added tunnel lights inside your tunnel when making it. Make it different from the others. Maybe use the tracks rails to power it?

Do you have any tips for printing small buildings? I love printing small structures, but the base always comes out warped

Gawe video Gerben, dankie.

It looks good, but I bet it's too heavy